 |
I had 2 issues. First, I like to have the rods at 90 degrees but this was impossible with the supplied connector. So I stacked two connectors ontop of each other and secured with cable ties, allowing the rods to be at 90 degrees.
Second, I found the fit was a little too tight, making it a job and a half to insert the rods into the connector. I also damaged one of the rods trying to do this, and I have damaged the connector a bit too. I will probably sand a little material off the rods to make them slightly easier to fit.
Other than this they work very well.
 |
|
|
