Giantcod RC

[joatman59Mon Dec 19, 2011 10:36 pm]

help

[mario ramosTue Nov 22, 2011 7:01 pm]

Please any one can tell me if giantcod as a recever for the RDS800FHSS Sanwa???

[maverickFri Nov 18, 2011 8:43 pm]

How many posts do you need to be allowed to attach a URL link? I cant find any mention of it but when I try it says "Ooops! You do not have enough posts …….."

[chriskleighWed Nov 02, 2011 3:12 pm]

i am new to rc helis why would you use a 4 in 1 mixer for my honey bee v2 oposed to a receiver and giro have just converted my old tchalinger fp-6nl ransmiter to 2.4gig and just realised the frsky receiver has not got the tail trim dont know were to go now can any one help me thanks

[chriskleighMon Oct 31, 2011 5:01 pm]

has any one hacked a futaba fp-t6nl transmiter with a fsky 35meg to 2.4 gig connections i think i know were they go but not 100% thanks

[scott harwoodWed Oct 12, 2011 11:29 pm]

the post i have just put up could you please reply quikly

[scott harwoodWed Oct 12, 2011 11:28 pm]

im totaly new to rc planes ive seen videos on youtube im trying to build a rc plane to be the base for my uav could you help

[flying420ukFri Sep 30, 2011 4:21 pm]

aint there no 1 want to help me

[flying420ukFri Sep 30, 2011 11:30 am]

ps to the message i just put up i know i have to do it off tx but i just need to find the beeps and dashes to know wat order im changeing as im going round in circles

[flying420ukFri Sep 30, 2011 11:27 am]

hi would anyone know where i could get the user manual for gc rcmax 60 amp esc ,im trying to change it from soft start to harder start as when i put 14.8v batt on it it stutters then kicks in to life at full throttle sure i read on 1 of the comments that if i did this it would sort it out any help much gratefullness dean

[Stu PheddWed Sep 07, 2011 4:49 pm]

I have converted many RD6000s to both Corona and Frsky with no problems , there is lots in the forum on converting to Corona and there is no difference in going to Frsky

[magnaWed Aug 31, 2011 9:30 am]

Has anybody converted a 40 ic powerd Magnatilla to electric ,model wght with ic power is 5lbs 4ozs.

[pjc130Wed Aug 24, 2011 1:08 pm]

hi, I would like to try and convert my Sanwa rds6000 to 2.4 ghz has any one tried the frsky conversion and offer any advise?

[canhotaTue Aug 23, 2011 10:10 pm]

hyi guys i’m starting using electric motors . i would like to know the diference beetuwin bec , ubec ,or sbec esc’s any help than’s

[grahamricThu Aug 18, 2011 10:23 am]

hi all,i am trying to assemble an air retract system and i can’t see what i need to link the one way air valve to a pump,do i need another adaptor or a special pump? thanks

[grahamricThu Aug 18, 2011 10:21 am]

hi all,

[RogThu Aug 11, 2011 2:52 pm]

Hi All….As a newbie to rc planes, i am totally lost…I have a Cessna 3 bladed prop plane, is it possible to change from 3 blades to 2. The prop othat was on the plane was a 3 blade 8×6, if it is possible can anyone advise as to what 2 bladed prop i can change to….Thanks

[randallSun Aug 07, 2011 6:09 pm]

does any one know how i can post a question ?

[griffin10010Mon Aug 01, 2011 6:08 pm]

Hello. Can anyone confirm please the correct Fsky Module to use with the JR2610 transmitter with a removable module. I think it’s the V8JT. Many thanks.

[juanmannbandThu Jul 14, 2011 9:50 am]

Thanks tweedpiper for your response. My 650 can motor was geared actually but was very heavy as well. Ther’s not a lot of room up front for the motor but the GT2218 motor will fit nicely. I will use a smaller folding prop as you suggest probably a 9×5 or similar. Also battery will mount well up front in the fuse to help with the CG issue. Thanks again.

[tweedpiperWed Jun 29, 2011 12:38 pm]

for juanmannband,that`s a big prop for an ungeared 650, but you`re going in the right direction with a brushless motor. The combo you suggest will work but don` rush into it. Check how you are going to mount the motor, and if there`s room go for more power, even if you have to use a 40A ESC. The battery is plenty if you keep the run time short, or don`t give it full throttle. Biggest problem I found is to keep the CG forward, there`s quite a difference in the motor weight, and it`s better to balance with a more powerful motor than to have to add a lump of lead.

[juanmannbandSat Jun 25, 2011 2:14 pm]

I have a 2m power glider weight less 7 cell NiMh pack is 2.5lb. The current power set up is a 650 brushed can motor turning a 12×6 folding prop. performance on climb is embarrasing alongside other club members using brushless motors and Lipo batteries. I am wanting to know if the following combination from Giantcod website would be suitable. 2200mAh 3S 20C/30C lipo, E-Power GC GT2218 1000Kv motor and a Hobbyking Pentium 30A ESC. Iwould prefer to use the same 12×6 prop. Any help would be appreciated.

[shoeboxTue Jun 21, 2011 4:20 pm]

Can anyone help me please, i have a futaba pcm 1024 (35mhz), i want to change it to a 2.4, is the frsky module any good for my futaba? thank you.

[burgesswalesTue Jun 14, 2011 10:34 pm]

bnairb In answer to your question posted Tue May 10, 2011 12:38 pm You will need to isolate the power from the ESC to the receiver. i) Pull the BEC connector from the receiver Throttle channel. ii) carefully cut short section out from the red wire and reconnect to the Throttle channel on the receiver. iii) Connect the 4.8 volt battery pack into the receiver channel marked BATT or Switch, via an on/off switch & harness.

[PlonkerSun Jun 12, 2011 11:51 am]

Has anyone converted a Futaba FF6 tx (old one) to 2.4ghz ? All help appreciated.