Giantcod RC

[deanb101Wed Jan 18, 2012 3:49 am]

Does anyone know how to use the Giant Cod flight sim dongle with Aerofly ?

[Robin70922Wed Jan 04, 2012 9:11 am]

Can you recommend a power train set up using Cod parts for the Multiplex Fun Cub. I don’t want a motor set up that will shake the plane to bits but I would like it capable of hovering. Specifically what would you recommend for ; motor and propellor Esc Battery set and charger Servos Many thanks Robin

[joatman59Mon Dec 19, 2011 10:36 pm]

help

[mario ramosTue Nov 22, 2011 7:01 pm]

Please any one can tell me if giantcod as a recever for the RDS800FHSS Sanwa???

[maverickFri Nov 18, 2011 8:43 pm]

How many posts do you need to be allowed to attach a URL link? I cant find any mention of it but when I try it says "Ooops! You do not have enough posts …….."

[chriskleighWed Nov 02, 2011 3:12 pm]

i am new to rc helis why would you use a 4 in 1 mixer for my honey bee v2 oposed to a receiver and giro have just converted my old tchalinger fp-6nl ransmiter to 2.4gig and just realised the frsky receiver has not got the tail trim dont know were to go now can any one help me thanks

[chriskleighMon Oct 31, 2011 5:01 pm]

has any one hacked a futaba fp-t6nl transmiter with a fsky 35meg to 2.4 gig connections i think i know were they go but not 100% thanks

[scott harwoodWed Oct 12, 2011 11:29 pm]

the post i have just put up could you please reply quikly

[scott harwoodWed Oct 12, 2011 11:28 pm]

im totaly new to rc planes ive seen videos on youtube im trying to build a rc plane to be the base for my uav could you help

[flying420ukFri Sep 30, 2011 4:21 pm]

aint there no 1 want to help me

[flying420ukFri Sep 30, 2011 11:30 am]

ps to the message i just put up i know i have to do it off tx but i just need to find the beeps and dashes to know wat order im changeing as im going round in circles

[flying420ukFri Sep 30, 2011 11:27 am]

hi would anyone know where i could get the user manual for gc rcmax 60 amp esc ,im trying to change it from soft start to harder start as when i put 14.8v batt on it it stutters then kicks in to life at full throttle sure i read on 1 of the comments that if i did this it would sort it out any help much gratefullness dean

[Stu PheddWed Sep 07, 2011 4:49 pm]

I have converted many RD6000s to both Corona and Frsky with no problems , there is lots in the forum on converting to Corona and there is no difference in going to Frsky

[magnaWed Aug 31, 2011 9:30 am]

Has anybody converted a 40 ic powerd Magnatilla to electric ,model wght with ic power is 5lbs 4ozs.

[pjc130Wed Aug 24, 2011 1:08 pm]

hi, I would like to try and convert my Sanwa rds6000 to 2.4 ghz has any one tried the frsky conversion and offer any advise?

[canhotaTue Aug 23, 2011 10:10 pm]

hyi guys i’m starting using electric motors . i would like to know the diference beetuwin bec , ubec ,or sbec esc’s any help than’s

[grahamricThu Aug 18, 2011 10:23 am]

hi all,i am trying to assemble an air retract system and i can’t see what i need to link the one way air valve to a pump,do i need another adaptor or a special pump? thanks

[grahamricThu Aug 18, 2011 10:21 am]

hi all,

[RogThu Aug 11, 2011 2:52 pm]

Hi All….As a newbie to rc planes, i am totally lost…I have a Cessna 3 bladed prop plane, is it possible to change from 3 blades to 2. The prop othat was on the plane was a 3 blade 8×6, if it is possible can anyone advise as to what 2 bladed prop i can change to….Thanks

[randallSun Aug 07, 2011 6:09 pm]

does any one know how i can post a question ?

[griffin10010Mon Aug 01, 2011 6:08 pm]

Hello. Can anyone confirm please the correct Fsky Module to use with the JR2610 transmitter with a removable module. I think it’s the V8JT. Many thanks.

[juanmannbandThu Jul 14, 2011 9:50 am]

Thanks tweedpiper for your response. My 650 can motor was geared actually but was very heavy as well. Ther’s not a lot of room up front for the motor but the GT2218 motor will fit nicely. I will use a smaller folding prop as you suggest probably a 9×5 or similar. Also battery will mount well up front in the fuse to help with the CG issue. Thanks again.

[tweedpiperWed Jun 29, 2011 12:38 pm]

for juanmannband,that`s a big prop for an ungeared 650, but you`re going in the right direction with a brushless motor. The combo you suggest will work but don` rush into it. Check how you are going to mount the motor, and if there`s room go for more power, even if you have to use a 40A ESC. The battery is plenty if you keep the run time short, or don`t give it full throttle. Biggest problem I found is to keep the CG forward, there`s quite a difference in the motor weight, and it`s better to balance with a more powerful motor than to have to add a lump of lead.

[juanmannbandSat Jun 25, 2011 2:14 pm]

I have a 2m power glider weight less 7 cell NiMh pack is 2.5lb. The current power set up is a 650 brushed can motor turning a 12×6 folding prop. performance on climb is embarrasing alongside other club members using brushless motors and Lipo batteries. I am wanting to know if the following combination from Giantcod website would be suitable. 2200mAh 3S 20C/30C lipo, E-Power GC GT2218 1000Kv motor and a Hobbyking Pentium 30A ESC. Iwould prefer to use the same 12×6 prop. Any help would be appreciated.

[shoeboxTue Jun 21, 2011 4:20 pm]

Can anyone help me please, i have a futaba pcm 1024 (35mhz), i want to change it to a 2.4, is the frsky module any good for my futaba? thank you.