 |
Sicely machined piece. The screws to hold the folding blades is 3mm, however the hole where these fit into in the hub are slightly larger (I guess 4mm). So there’s a lot of play.
The prop adapter is of the collet type but the nut to hold the hub has its hole slightly off-centre.
The hub accepts 8mm rooted blades, but it’s a close fit. Had to sand 2 blades to fit between the arms of the hub.
I’d also replace the nut, and add some shrinkwrap around the screws to avoid the play.
Removed one star beacuse of the above. Otherwise, a nice 3 blade spinner.
 |
|
|
