Specifications:

RPM per volt : 2200
No Load Current / 10V: 1.4A
Wire Winds / Turns: 12
Ni-Mh Battery: 6 - 10 cells
Li-Po Battery: 2 / 3 cells
Max efficiency current: 14~22 A (>75%)
Max efficiency: 72%
Max Current: 28A / 60 sec
Dimension: 27.5 x 30mm
Shaft: 3.17mm
Weight: 47g

Specifications:

23.5 x 15.7 x 6.1 mm , weighs 17 gram
Constant current 18A Max 20A
Li-Poly 2-3 cells; Ni-MH 4-10 cells Auto Detect
BEC: 1A
Auto shut down without signal.
Auto Low battery Slow down at 3.0V/Lipo, cut-off at 2.9V/Lipo
Limited programmability easy to use.
Auto Low battery Slow down at 3.0V/Lipo, cut-off at 2.9V/Lipo

This is a good entry level speed controller and is on par with Towerproand other hyped up budget brands.

Specifications:

Weight: 57g
Capacity: 1000mAh
Voltage: 2S1P (7.4v) 2 cell
Discharge Rate: 20-30C
Size: 68x35x14mm (including cell spacers for ventilation)
Charge Plug: JST-XH

We take absolutely no responsibility for ANY accidents, mishaps or explosions you may have with these packs used correctly or not. You use them at your own risk and do NOT charge them unattended.

Specifications.

Size: 36x18.7x8.2mm
Weight: 9.2g
Distance: >1.5Km
Sensitivity: +/-8kHz at 65dBdown
Channels: 1-8
Filtering: DSP
10.7Mhz
+10dBm

Due to software problems these receivers CANNOT lock onto frequencies below channel 60 or above 80.

Specifications:

Input Voltage: 11~18v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~5.0A
Discharge current range: .1~1.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 580g
Dimensions: 133x87x33mm

Specifications:

RPM/V (kv): 1534 RPM/V
No. Of cells: 2-3 Li-Poly
No load current / 10 V: 0.9 A
Max. efficiency: 82%
Max. efficiency current: 7 -16 A (>75%)
Current capacity: 16A/60s
Internal Resistance: 0.15 ohm
Stator Dimensions: 22x10 mm
Weight: 39 g
Shaft diameter: 3 mm

Recommended model weight: 200 -800 g
Recommended prop without gearbox: 5-7 inches

Specifications

No. Of cells: 3x Li-Poly
KV: 920
Max. efficiency: 80%
Max. efficiency current: 20- 30 A (>75%)
No load current: 10 V 1,7 A
Current capacity: 38 A/60s
Dimensions: 30x15 mm
Weight: 112 g/3.9oz.
Shaft diameter: 5 mm

Recomended model weight: 600-1400 g
Recomended prop without gearbox: 11*7 12*6

Comes with mount and prop adapter as is standard for all BL emax motors.

Specifications

*Item No.:DYS0206
*Weight:9g
*Size: 23.0 x 12.0x 21.5mm
*Operating Speed : 0.12sec/60o
*Stall Torque : 1.5 kg/cm
*Operating Voltage:4.80-6 Volts

Excellent quality servos, anyone that has used these is amazed by quality!!Light and very quick servo ideal for weight sensitive applications.Includes several servo horns, grommets and mounting screws.